Hot Water Tank

nobelWater storage tank: cold rolled steel with a double internal layer of enamel, baked at 860°C according to
DIN 4753.
The enameling is done in our own high tech industrial facilities. The boilers are checked individually upon exit from the enameling unit, assuring the top quality of the enamel.
yy Heat exchangers for the transfer of thermal energy:
-- Internal coil type heavy duty steel (type Tubo) heat exchanger for the connection to the solar collectors.
-- Optional coil type heat exchanger, from heavy duty steel (type Tubo) integrated in the upper part of the tank, in order for the secondary heating source to heat only the upper part of the tank.
Further technical data concerning the upper heat exchanger refer to the table concerning BL2 tanks. Thermal insulation: which minimises heat losses, maintaining the hot water temperature:
-- Expanded ecologically safe polyurethane for up to 500L capacity types.
-- 100mm thick soft polyurethane for 1000L capacity types.
yy External housing of special PVC & highly resistant ABS caps of excellent aesthetics.
yy Cathode protection with a periodically replaceable magnesium anode for effective internal protection against corrosion and mineral deposits which are caused by electrolytic reactions.
yy Electrical components for up to 300L capacity types
-- Heating element rated according to the local regulations of the country of destination*
-- Automatically regulated thermostat with bipolar protection and auxiliary fuse*
The Electrical components for up to 300L capacity types are optional and provided to order (electricity to be used as a back up power.

 

 


Hot-water-TankTank
: 2.5mm thickness cold rolled steel with a double internal layer of enamel, baked at 860ºC according
to DIN 4753.
The enameling is done in our own high tech industrial facilities. The water storage tanks are checked individually
upon exit from the enameling unit, assuring the top quality of the enamel!
2. Surrounding heat exchanger (Jacket) with internal expansion tank: cold rolled steel, 1.5mm thickness for the
operation of the closed loop, which is compulsory at low temperatures and also in areas with water with high
mineral content.
3. Thermal insulation: ecological, high-density, expanded polyurethane ensures minimum heat loss, maintaining
the hot water temperature.
4. External housing: naval aluminium alloy / pre painted galvanized steel.
5. Cathode protection by 2 magnesium anodes Ø22x300mm and Ø22x500mm for effective protection against
corrosion and mineral deposits caused by electrolytic reactions.
6. Large round flange rubber protected: innovative, smart design for the quick cleaning of minerals, fast
replacement of anode and immediate access to the electrical components.
7. Complete sealing of EPDM, non toxic material, which does not permit water to contact the flange, thus protecting
it against electrolysis and corrosion, specially made to withstand the generally accepted specifications with regard to the heat resistance.
8. Heating element rated according to the country of destination local regulations. (Optional, for the use of
electricity as an auxiliary power source). All electrical components carry a CE marking according to EN 60335-1
and EN60335-2-21 standards.
9. Automatically regulated thermostat with bipolar protection and auxiliary fuse. All electrical components carry
a CE marking according to EN 60335-1 and EN60335-2-21 standards.
10. Protective cover: designed to ensure the proper ventilation of the electrical section and its protection from the
environmental conditions.
Gland: for sealing the passage of the heating element’s connection cable.
11. Cold water inlet: brass 1/2” BSP male threaded pipe end for water stratification and 8bar safety valve for
releasing pressure.
12. Hot water outlet: 1/2” BSP male threaded pipe end.